Performance Center T/CR22 Extractor Plunger
This high-quality Performance Center T/CR22 Extractor Plunger has been developed by Tacticool22 to have less friction than the factory extractor, with a completely new geometry and material. All Tacticool22 products are made in the USA!
Product Description
Performance Center T/CR22 Extractor Plunger can use the factory spring if you want to upgrade it at a later time.
Some interesting facts about the new Performance Center T/CR22 Extractor Plunger. The 1/2-28 threaded barrel of the T/CR22 has the shorter “Pistol Length” threads at .4 inch (10mm) long and has an “O” ring. The very first modification you will notice is to the stock. The safety is over-sized, and the automatic bolt hold-open after the last round is fired is worth any additional cost. The automatic bolt release from the factory is a nice touch too.
Pro Tip: So you don’t have to center the safety before removing the action, mark it, a small, but time saving detail.
Features
- Firearm compatibility: Performance Center T/CR22, Thompson/center T/CR22
The information below is required for social login
Create New Account