Tacticool22

Performance Center T/CR22 Extractor Spring

$3.83

This high quality Performance Center T/CR22 Extractor Spring has been developed by the Tacticool22 R&D Lab to have more tension than the factory T/CR22 springs. This provides a superior grip on the rim of the .22 cartridge, even if you use the factory extractor plunger.

Be the first to review this product

Product Description

Performance Center T/CR22 Extractor Spring can be used with the factory plunger if you want to upgrade later.

Some interesting facts about the new Performance Center T/CR22 Extractor Spring. The 1/2-28 threaded barrel of the T/CR22 has the shorter “Pistol Length” threads at .4 inch (10mm) long and has an “O” ring. The very first modification you will notice is to the stock. The safety is over-sized, and the automatic bolt hold-open after the last round is fired is worth any additional cost. The automatic bolt release from the factory is a nice touch too.

Pro Tip: So you don’t have to center the safety before removing the action, mark it, a small, but time saving detail.

Features

Firearm compatibility: Performance Center T/CR22, Thompson/Center T/CR22

Made To:

Parts & Accessories