Stainless Recoil Assembly Guide Rod, for the .40 Cal SW Taurus G2C, G2S, G3C, and PT140 G2

Recoil Assembly for the  .40  Cal  S&W Taurus PT140-G2, G2S, G2C, and G3C pistol that includes:

• Fully Assembled Recoil Assembly
  
  

Lakeline Stainless Steel Guide rods have a reputation for being tough, really tough!

 

No plastic, or thin drawn parts!  The recoil rod is a single piece with the flange,  the most highly stressed part, machined as one piece with the Guide Rod.

 

We also machine the stainless recoil sleeve from another piece of stainless steel and it is stronger and harder than the factory drawn steel part.  It is full length, the same sleeve length and spring sizes as the factory part.  Its flange will not break off, allowing the outer spring to jump off and jam the action of your pistol.  Our guide rod is engineered so the highly stressed end, the end that contacts the barrel, is a solid piece of stainless steel. Finally, our Machined Stainless Steel Nut finishes the assembly and provides a custom look.

 

The springs are made from the best spring wire available and are carefully finished to make sure that they will not over ride themselves or the flanges they ride on.  The Lakeline springs rates are also optimized and provide a smoother recoil pulse than the factory parts while still shooting all standard rounds reliably. The open end of the spring is assembled towards the flanged end of the recoil rod.